Use these troubleshooting techniques to fix Canon Printer Error 5100

Possible strategies for solving Canon Printer Error 5100:

If you are struggling with your Canon Printer error 5100, you may encounter some symptoms that may hamper your work.

The most common sign of the glitch is the alternate blinking of the power lights. Follow the solutions mentioned below one by one and check which one is suitable for you.

Method 1: Check the Printer's, Internal Parts

If any small object is trapped inside the printer, your Canon printer may not work properly. The very first thing you need to do in these situations is to turn off the printer and also unplug the power cord.

After that, open the computer very minutely and search inside the printer. Inspect to see if any stretched pieces of paper or particles of dust are trapped or not inside.

You must find some small object in the case, then perform the next step.

Method 2: Perform Purge Mechanism

If the print head is not used for a long time, you will find a sliding mechanism in the printer. This can generate the error code in your Canon printer if it is not lubricated enough.

In such situations, you should use some grease to lubricate these sliders. Yet try not to pick it up on the black caps or the little wipers. 

Extract your Canon printer's right panel and trigger the clean feature.

Method 3: Clean the timing strip

You must clean the timing strip after conducting the second method. You will find a thin plastic strip across the drive belt. 

Now, on this strip, you have to press the five black vertical lines. You may find the 5100 error code on your device if you notice that the strip is uncleaned. With a moist lint-free cotton swab, you have to clean this strip carefully.

Solution 4: Reset Ink Cartridges

If the previous methods are not adequate to address the Canon printer error 5100, reset the ink cartridges and then test whether or not the same error code still appears on the monitor.

The first and most important thing you need to do is turn off your Canon printer and unplug it from the Power source. After that, when you plug the power cable back in, press the "On / Off" button.

You now have to press the "Stop / Reset" key twice when keeping the "On / Off" key down. Now, click the button "On / Off." This will bring in the factory model of your Canon printer.

Navigate to select the right arrow button until the display highlights the "Shipping Mode 3" option. Last, just press the "OK" button. Click the "Stop / Reset" key once more while seeing a message stating "Without Cleaning." 

It recommends you print a page to check whether or not the problem gets fixed. Now raise the printer cover up and wait until the cartridges move to the left. After that, the printer must be unplugged from the power source and both ink cartridges lifted out and the cover closed.

Method 5: Reseat "All Ink Tanks" option

If all methods fail to overcome Canon Printer Error 5100, this is the only way to resolve the error code on your own.

Next, you can search the printer's paper feed areas. You can use your smartphone or other bright light flashlights to test your printer's inside portion. Additionally, investigate that the printer does not contain any paper jams that could contribute to the mistake.

Now, look inside the printer at the location of the inks. Always, be sure that inside the printer there is no paper jam that prevents the free movement of the print head.